What happened to your powerhead float switch? I purchased one from http://www.floatswitches.net/ and I'm still using it... works great but where there problems that made you discontinue them?
We had to stop making them, people were using large pumps. This was exceeding the rating of the switch, even after saying not too. You can make your own. All you have to do is break the hot wire of the power head with our float switch. That is cut the hot wire of the power head "the one with the small prong" and tie each end of the float switch to the cut wires. Place the float switch in the water that you want to top off. This will keep it within 1/4 inch. Make sure that you do not exceed the rating of the float switch, Aqua Tech power head works good. I think it's the 190, which is fine for top off, and Wal-mart has them for about $18.00
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum