Found this for you...
Step 1:
Access your Linksys routerﾃ｢竄ｬ邃｢s web-based setup page through Cisco Connect. For instructions,click here.
NOTE: To launch Cisco Connect on a Macﾃつｮ computer, navigate to the Applications folder in Go, and then start Cisco Connect. For detailed instructions, click here.
Step 2:
Click on the Applications & Gaming tab.
Step 3:
On the Single Port Forwarding sub-tab, fill out the
appropriate fields with the correct entries. In this example, we'll be
forwarding ports based on the following information:
Static IP Address set on Xbox 360ﾃつｮ: 192.168.0.15
Default Xbox LIVEﾃつｮ ports:
Port: 80, Protocol: TCP
Port: 88, Protocol: UDP
Port: 53, Protocol: both (TCP & UDP)
Port: 3074, Protocol: both (TCP & UDP)
NOTE: For assistance on setting up a Static IP on your Xbox 360ﾃつｮ, contact Xboxﾃつｮ support.
Step 4:
Under Application Name, enter ﾃ｢竄ｬﾅxboxliveﾃ｢竄ｬﾂ for each of the lines that youﾃ｢竄ｬ邃｢ll be working on. You may enter a different name if you like.
NOTE: In this example, a total of four (4) xboxlive lines are entered.
Step 5:
Complete the rest of the entries for each field. Start by
entering each unique port number inside the allocated fields under the External Port column. Proceed by repeating the same port numbers under the Internal Port column.
NOTE: An error message, shown
below, will prompt you if the port numbers you entered are out of range.
Make sure that the port numbers you enter are within the range of 0 ﾃ｢竄ｬ窶
65535.
Step 6:
Under the Protocol column, be sure to select the correct protocol for each line.
Step 7:
Under the To IP Address column, complete the empty field by enter IP address of your Xbox 360ﾃつｮ. In this example, 192.168.0.15 is the IP address of the Xbox 360ﾃつｮ. Therefore, 15 is the value we need to enter for each line.
NOTE: If your Xboxﾃつｮ has a different IP address assigned, enter that IP address instead.
Step 8:
Under the Enabled column, make sure that each box is checked.
After completing the steps shown above, you should now have a screen similar to the screenshot below:
NOTE: Adding of ports to be forwarded is only limited to the space allotted on the page.
Step 9:
After completing all the necessary entries, click 
.
Step 10:
Once your changes have been saved, a confirmation screen should appear. Click on the Continue button to return to the previous page.
NOTE: If youﾃ｢竄ｬ邃｢re having issues with the
Network Address Translation (NAT) type connection of your gaming device, click
here for troubleshooting instructions.
Topic Options
Post Options
Thanks(0)
