Anyone good with acrylic?
Printed From: Utah Reefs
Category: Specialized Discussion
Forum Name: DIY
Forum Description: Do it Yourself
URL: http://www.utahreefs.com/forum/forum_posts.asp?TID=20408
Printed Date: July 25 2026 at 1:32pm
Software Version: Web Wiz Forums 12.03 - http://www.webwizforums.com
Topic: Anyone good with acrylic?
Posted By: Crzyfshguy
Subject: Anyone good with acrylic?
Date Posted: September 10 2007 at 1:48am
|
Due to my stand being odd shaped, I cant really find a sump that I like. I was hoping someone on here might be generous enough to make me a small sump and/or overflow box if I supplied the stuff. I wouldnt even care if it were something I had to silicone the edges on to ensure a perfect seal, I'd just want it to look good. ------------- 45G w/ leds 15G sump MP10es |
Replies:
Posted By: Shane H
Date Posted: September 10 2007 at 8:50am
|
Tyson,
You may try Eric at Marine Aquatics. As far as acrylic work goes, he's certainly one of the best.
Good luck.
|
Posted By: Mike Savage
Date Posted: September 10 2007 at 9:17am
|
Eric at Marine Aquatics made mine too. One other thing you could try is getting some scrap acrylic and learning to work with it yourself. You could try getting it at Regional Supply in SLC.
Mike -------------  |
Posted By: bwinberg
Date Posted: September 12 2007 at 1:11am
|
it looks like suzy is good with acrylic. http://www.advancedaquarist.com/2007/7/diy - http://www.advancedaquarist.com/2007/7/diy ------------- 24 Gal JBJ Nano Cube |
Posted By: Mike Savage
Date Posted: September 12 2007 at 9:38am
|
Yes, that was a good article and project.
Mike ------------- |