Aquastyle Leds HELP PLEASE..

Hey I bought a dimmable driver and some leds to add some better lighting to my biocube. I hooked it all up and the lights are blinking on and off, then when i turn the dimmer down at all only a single red LED lights blinks faintly. Heres the info

Driver: 24-51 volts / 21-36 watts
LED's: all 3w / 3.4-3.6v / 700ma
1x royal blue
2x cyan
1x red
1x Uv
3x white (i have more whites to add if needed)
Just need a little help if anyone has had much experience.

I figured they would at least send a little wiring diagram but absolutely nothing so there is a chance i may have shorted something in the process of assembly.

Below is a picture of what i have so far... Comments anybody??



Edited by Boxerboy - March 28 2013 at 6:45pm

You also have them connected in parallel. That could be your problem also. Most designs call for a series connection for the LEDs.

Wow thanks! It seems as tho it's common sense based on all the things I looked at but I had no idea. But series worked perfectly thanks phys and sandune!

Boxer,