Theorhetical DIY tank
Printed From: Utah Reefs
Category: Specialized Discussion
Forum Name: DIY
Forum Description: Do it Yourself
URL: http://www.utahreefs.com/forum/forum_posts.asp?TID=53932
Printed Date: July 21 2025 at 6:23am
Software Version: Web Wiz Forums 12.03 - http://www.webwizforums.com
Topic: Theorhetical DIY tank
Posted By: clubbby
Subject: Theorhetical DIY tank
Date Posted: January 26 2012 at 1:15pm
I'm just amusing myself with this idea and saw a few posts on it, and had some questions. Don't feel particularly oblidged to answer, as I wouldn't be doing any of this for years, should I decide to do it. I figure we might be in the mood for an upgrade right about then.
I was thinking of what an enormous sense of satisfaction I would be to build your own tank. I understand from what I've read you're not going to save a dime over buying a premade tank but as I thought about it I realized I didn't care.
Some of the items I read on this forum eluded to using glass for DIY tanks. Is there a reason that glass would be better than acrylic? Is it less prone to scratching? I also think I read somewhere that acrylic gets brittle over time, which sounds ominous. The type of glass I remember seeing is called Starfire glass. What is special about this as opposed to other glass?
I also read about needing a particular type of silicone. I don't recall reading anywhere of a specific brand or name, any info on that?
Last question I have is about stands. It'd be silly to futilely spend your own time reinventing the wheel on a tank and get a predone stand, so if one were to build a stand capable of holding a large tank... let's say 250g+, what would you use? I'm just thinking a sturdy frame of pressure treated wood would do the job but would be interested to hear other opinions.
-------------
55G Fledgeling Reef
|
Replies:
Posted By: Adam Blundell
Date Posted: January 26 2012 at 2:25pm
I built my stand. I had Tyler on here build my tank (starfire) and in the past I made lots of glass and acrylic tanks. It's totally worth it if you want an odd shaped tank or something unique.
Chad on here has been building quite a few tanks. And Tyler is obviously a pro at tanks. But if you want to build a 30 or so gallon tank just ask for help, lots of people ready to lend a hand.
Adam
ps- in general.... glass is always preferred as it doesn't scratch nearly as easy as acrylic
-------------
Come to a meeting, they�re fun!
|
Posted By: clubbby
Date Posted: January 26 2012 at 3:13pm
I'm glad to know there are people around with experience. I want to make it myself as opposed to delegating it sheerly for the sense of self satisfaction, but you make a great point in taking on a smaller project first, and I think I know just the thing for it!
I have a red eared slider turtle in a half full (12-15g or so) 29g tank but he's getting a bit big for it. I could use a deeper, shallower (more deep, less high) tank of about the same size for him so that seems like a great starter project.
Oh and another question. People were saying to put a 1/16" to 1/32" spacing when siliconing the sides of a tank. I'm sure it's something obvious that I'm missing, but what's the spacing needed for? Just more surface area for the silicon to grab on to?
-------------
55G Fledgeling Reef
|
Posted By: Adam Blundell
Date Posted: January 26 2012 at 3:27pm
For a tank like that.... I'd just go for it. Seriously I've bought lots of glass and silicone and just had at it. I like the clear actual aquarium silicone from the pet stores. If I go black, I'd buy the silicone from Tyler (tcfab).
Adam
-------------
Come to a meeting, they�re fun!
|
|